ALAPATT ARCADE
SHENOY'S JUNCTION
M.G.ROAD, ,ERNAKULAM. TEL.: 2371619, 2371620
Home  |  About Us  |  Diamonds  |  Gold  |  Stones & Gems  |  Gift of love  |  Enquiry  |  Promotions  |  Contact Us     Pick your choice 

958 Corrosponds to 23 Carat
916 Corrosponds to 22 Carat
875 Corrosponds to 21 Carat
750 Corrosponds to 18 Carat
585 Corrosponds to 14 Carat
375 Corrosponds to 9 Carat
A millesimal fineness number
indicative of gold content on
a scale of 100
ASSYAYING AND HALLMARKING CENTRE'S MARK
The identification Mark of BIS recognized . Assaying and
Hallmarking Centre where the jewellery has been assayed
and hallmarked.
YEAR OF MARKING
Code letter represents the year of hallmarking of
gold jewellerye. G. ' D ' for 2003
JEWELLER'S MARK
Identification Mark of BIS Certified jeweller/ jewellery manufacturer
The Caratage (Karatage) System For Gold Jewellery

Gold jewellery/ jewelry is usually described in terms of caratage (karatage), which is an indication of its gold content, for example 18 carat or 18K. Alternatively, the gold content can be described in terms of fineness, which is the gold content expressed in parts per thousand, for example 750 (which is 18 carat or 75.0% gold). Since the price paid by the purchaser for gold jewellery is based on the amount of gold in it, it is important for the consumer to know how many carats (in USA
karats) of gold there is in the piece. Most jewellery worldwide is marked with the caratage or fineness. This may be part of a Hallmark on the jewellery (see Assaying & Hallmarking for the definition of a mark and hallmark). Pure gold (fine gold) is 24 carats (karats) and so 24 carats is theoretically 100% gold. In Chinese, it is also known as Chuk Kam, meaning pure gold and is defined as 99.0% gold minimum. Thus, there is a 1.0% negative tolerance allowed in this case.

The Caratage System

Any caratage value lower than 24 is a measure of how much gold there is in the jewellery gold alloy. Thus 18 ct is 18/24ths of 100% gold = 75.0% gold. In fineness terms, this is described as 750 fineness, i.e. 750 parts of gold per thousand parts. The table below gives the various caratages and their equivalent gold content in percent or in fineness terms as recognised by international standards. This is not always exactly the mathematical value! For example, 22 carat is mathematically 22/24ths x 100 = 91.666% but the accepted international standard is 91.60%

Definition of Caratage in gold content for recognised international standards

Carats/Karats
Fineness, ‰
Gold content, %
Comments
24
999
99.9
-
24
990
99.0
Minimum allowed
22
916
91.6
Indian subcontinent
21
875
87.5
Arabic countries
(19.2)
800
80.0
Standard in Portugal
18
750
75.0
Standard caratage
14
585
58.5
583/58.3% in USA
10
417
41.7
Minimum in USA
9
375
37.5
U.K. standard
8
333
33.3
Minimum Germany


Many countries only allow certain caratages of gold jewellery to be sold. For example, in the United Kingdom, one can make and sell 9, 14 ,18 and 22 carat gold jewellery but not 12 carat gold as the latter is not a recognised caratage standard by law. In some countries, jewellery lower than 12 carats (50% gold or 500 fineness) cannot be described as gold.

The advantage of making jewellery in caratages lower than 24 ct, apart from price, is the wide range of colour that can be achieved, from socalled green, pale yellow, yellow, rose/pink to red as well as white, depending on the balance of other alloying metals used. The lower the caratage, the wider range of colour is possible (see Colours of Gold). Additionally, properties such as strength and hardness are improved over pure gold, leading to improved wear and scratch resistance and less liable to distortion and damage.

The caratages of jewellery allowed by law varies from country to country (see below for link to Table of national fineness standards). In the U.K., for example, the following caratages are allowed: 9 (375), 14 (585), 18 (750), 22 (916), and 24 (990 and 999). In many countries, a large range of caratages is legally allowed but only a few are in common use. The dominant caratage also varies as shown in the next table:

Region
Typical Caratage (fineness)
Oriental East (China, Hong Kong, Taiwan)
24 carat 'Chuk Kam' (99.0% min)
India & subcontinent
22 carat (91.6%)
Arabic countries in Gulf region
21 carat (87.5%)
Europe - Southern */ Mediterranean
18 carat (75.0%)
Europe - Northern, USA, etc**
8-18 carat (33.3 - 75.0%)